LoRa / LoRaWAN Temperature Transmitter – 2 External Contact Probes (PT1000)
You might have tried using Wireless Sensors in the past to find out that they don't work 100% of the time. Just take a look at what other Niagara 4 BMS Engineers had to say about them in this post here.
Issues like short battery life involve extra site visits. And unplanned visits can be costly when they come out of your own pocket.
Another costly and time-consuming problem is the loss of signal. Configuring the sensors to avoid concrete walls involves many labour hours.
So you will be happy to learn that you can install these sensors without ever worrying about the battery life and the loss of signal.
This Enless Wireless LoRa / LoRaWAN IP65 transmitter with two external temperature contact probes allows you to measure temperatures (°C data) in a remote manner, on contact with surfaces.
The robustness of our transmitter – IP 65 housing – and its high environmental tolerance (probe temperature range -180°C / +250°C) allow it to withstand any type of “outdoor” environment, sometimes under extreme conditions.
Thanks to its two 2.0m probes, this temperature transmitter is especially suitable for applications such as monitoring of temperatures on inlet/outlet fluid circuits of all types and, in particular, continuous observation of sanitary hot water networks for preventing the health risk of legionella. It is also often used for temperature monitoring in cold rooms, or in agricultural environments.
This product is LoRa/ LoRaWAN compatible. It allows you to build an operated or private network. In LoRaWAN public mode, high-precision °C data is retrieved through the transmitter and sent to the LoRa network operator cloud at a flexible frequency. In LoRa Enless Wireless private mode, the data is transmitted over the radio to our Modbus receiver, which is usually connected to a gateway. In LoRaWAN’s private mode, the temperature data flows directly from our transmitter to the gateway.
High and low temperature thresholds can be viewed via the supervision system in place which also allows the configuration of alerts.
This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.
|Dimensions||L 118 x H 79 x W 43 mm|
|Enclosure and IP rating||ABS IP 65|
|Power supply||Replaceable D 3.6 V Lithium battery - Low battery alert|
|Battery autonomy / Periodicity||5 years battery life with 5mn periodicity / Configurable periodicity|
|Configuration / Installation||Radio|
|Type of sensor||Contact probes 2 wires PT 1000|
|Tx working temperature||-180°C / +250°C|
|Sensor accuracy||+/- 0,5°C|
If you need help selecting your wireless sensors please read our 5 min guide.
Do you have a question about this product?